.375 Holland & Holland Magnum

.375 H&H Magnum

.375 H&H Magnum (Left) .338 Winchester Magnum (Right) US Quarter for scale
Type Rifle
Place of origin  United Kingdom
Production history
Designer Holland & Holland
Designed 1912
Produced 1912–present
Variants .375 H&H Ackley Improved, .375 Weatherby Magnum
Specifications
Parent case Unique
Bullet diameter .375 in (9.5 mm)
Neck diameter .404 in (10.3 mm)
Shoulder diameter .448 in (11.4 mm)
Base diameter .513 in (13.0 mm)
Rim diameter .532 in (13.5 mm)
Rim thickness .220 in (5.6 mm)
Case length 2.850 in (72.4 mm)
Overall length 3.6 in (91 mm)
Primer type large rifle magnum
Ballistic performance
Bullet weight/type Velocity Energy
200 gr (13 g) JFP 3,195 ft/s (974 m/s) 4,534 ft·lbf (6,147 J)
235 gr (15.2 g) SP 2,964 ft/s (903 m/s) 4,585 ft·lbf (6,216 J)
250 gr (16 g) SP 2,835 ft/s (864 m/s) 4,463 ft·lbf (6,051 J)
270 gr (17 g) FS 2,694 ft/s (821 m/s) 4,352 ft·lbf (5,901 J)
300 gr (19 g) SPBT 2,645 ft/s (806 m/s) 4,661 ft·lbf (6,319 J)
Source(s): Hodgdon Online Reloading Data

The .375 Holland & Holland Magnum is a medium-bore rifle cartridge. The .375 H&H was only the second cartridge ever to feature a belt, now common among magnum rounds.[1] A popular misconception is that the belt is for headspace, with some saying it is due to the narrow shoulder. However, many cartridges with much smaller shoulders and greater taper have no belt at all and still achieve proper headspacing. A measurement of belts on various cases and of the belt portion of various reamers quickly demonstrates that the variation in measurements is so great that consistent headspacing could not be achieved by relying on the belt. The belts on these cases were so that the cartridges could be fired in the newly popular bolt action guns without a rim to complicate feeding, and yet still allow use in the double rifles that were popular at the time and which use shotgun-type extractors designed to work on a rim. The belt replaced the rim in function on these new rimless cartridges.

It was introduced by the British company Holland & Holland in 1912 as the .375 Belted Rimless Nitro-Express. It initially used cordite propellant which was made in long strands – hence the tapered shape of this cartridge, which was also to ensure smooth chambering and extraction from a rifle's breech.[2]

The .375 H&H is often cited as one of the most useful all-round rifle cartridges, especially where large and dangerous game occurs.[3] With relatively light bullets in the region of 235 to 270 grains (15 to 17 g), it is a flat-shooting, fairly long-range cartridge ideal for use on light to medium game. With heavy bullets of 300 grain (19 g) and greater, it has the punch necessary for large, thick-skinned dangerous game. In many regions with thick-skinned dangerous game animals, the .375 H&H is seen as the sensible minimum acceptable caliber, and in many places (in Africa, primarily) it is now the legal minimum for hunting such game. African game guides, professional hunters, and dangerous game cullers have repeatedly voted the .375 H&H as their clear preference for an all-round caliber, if they could only have one rifle. A similar preference has been expressed by Alaska game guides for brown and polar bear country[2]

Unlike what is seen in most calibers, many .375 H&H rifles also achieve nearly the same point of impact over a wide range of bullet weights at all commonly used distances, further simplifying a professional hunter's choice in selecting different grain bullets based upon the game hunted, without requiring significant scope or sight adjustments, which further serves to popularize the .375 H&H Magnum among professional hunters (PHs).[4][5]

Contents

History & origins

.375 H&H Magnum is the result of competition between British rifle manufacturers to develop new cartridges to take advantage of the new smokeless powders. The 9.5x57mm Mannlicher-Schönauer cartridge had a major influence on British rifle manufacturers[1] and was soon adopted by Westley Richards and Eley as the .375 Rimless Nitro Express 2.25”. In an effort to compete, Holland & Holland introduced the .400/375 Belted Nitro Express. The .400/375 H&H (also known as the .375 Velopex) as it is sometimes known was the first cartridge manufactured to feature a belt. The addition of a belt to a rimless cartridge design provided the advantage of allowing for correct headspacing of highly tapered cartridges (an advantage of flanged cartridges) and smooth feeding through magazine rifles (the advantage of rimless cartridges).[6]

The introduction of the 9.3x62mm Mauser cartridge in 1905 had a profound and lasting influence on hunters in Africa. Compared to the British double rifles, the Mauser was a far cheaper rifle to manufacture and therefore cheaper to acquire. Furthermore, while the double rifles gained little from industrialization the Mauser rifles had gained by for mass production, and were contracted to produce military rifles for many countries both inside and outside Europe. The result was cheap magazine rifles capable of firing one of the very best candidates for the all round hunting cartridge in Africa. The influence of Mauser's K98 action must not be understated; British gunmakers such as Rigby were purchasing the Mauser success K98 actions for use with their own cartridges.[7] The popularity of the 9.3x62mm Mauser was so such that everyone from the German farmers in Africa to the White Hunters from Europe discarded their previous doubles and less powerful magazine rifles and took to the 9.3x62mm. The 9.3x62mm demonstrated that it was adequate for everything from the Elephant to the dik-dik and had acquired a reputation to match.[6]

This trend did not go unnoticed by British rifle manufacturers. Between 1909 and 1911 Holland & Holland, Jeffrey, Rigby and Westley Richards introduced their own competing designs: .375 H&H Magnum, .404 Jeffery, .416 Rigby and the .425 Westley Richards in an effort to stem the tide of the 9.3x62mm. Furthermore, the influence of the high-velocity craze begun by the Canadian .280 Ross rifle had a marked effect on the Holland & Holland’s final design which also drew from their experience with the .400/.375 H&H cartridge.[6]

Holland & Holland decided that the rifle had to fire a bullet with an adequate sectional density as the 286 gr (18.5 g) bullet of the 9.3x62 mm Mauser cartridge which had demonstrated that it had the required penetration on thick skinned dangerous game. Secondly, the cartridge would require a high velocity so as to provide this penetration at extended ranges. The high velocity of the cartridge would have the added advantage of serving as a marketing tool. Thirdly, the cartridge must function reliably through a magazine rifle in tropical conditions and this required a tapered case working at lower pressures. Holland & Holland had determined that to provide adequate penetration a bullet with the sectional density similar to the 9.3x62mm required impact velocities of about 2,150 ft/s (660 m/s). Drawing from anecdotal evidence of hunters it was also determined that high velocities provided impressive kills on game. Another added advantage of the high velocities what that a misjudgment with respect to range would be mitigated by the higher velocity.[6]

Holland & Holland’s new cartridge was released together with a flanged version (.375 Flanged Magnum also known as the .375 Nitro Express) and was named the .375 Belted Rimless Nitro Express. It featured the belt from the .400/375 H&H cartridge, fired a 300 gr (19 g) bullet which had the same sectional density of the 286 gr (18.5 g) 9.3x62mm bullet at a velocity of 2,500 ft/s (760 m/s). The cartridge burnt cordite and had a rather low working pressure of 47,000 psi (3,200 bar) by modern standards so that spent cases would extract reliably in tropical environments of India and Africa.[6]

The new cartridge was a proprietary design unlike the 9.3x62mm and was considerably longer than its German counterpart. While many .375 H&H rifles were built on the longer Mauser actions, these actions required modifications to allow for the feeding and cycling of the .375 H&H Magnum cartridge. So while the .375 H&H provided considerable advantages over the 9.3x62mm the significantly greater cost of the H&H rifles presented a roadblock to the adoption of the .375 H&H over the 9.3x62mm cartridge and remained for a time a less attractive option.[6]

At the end of World War I Holland & Holland released the cartridge to the public for general trade. Also, new markets opened in America as more hunters sought to hunt in Africa. The .375 H&H was seen by many as the best medium bore cartridge available and which could be easily put to use hunting dangerous game in North America. Winchester was the first US gun maker to produce rifles chambered for the cartridge and did so beginning in 1925.[6]

The end of World War II saw many gun makers turning to the civilian shooting market when war time contracts began running out. FN, Mauser, Remington and Winchester began turning out quality bolt action rifles and with increasing number of sportsmen taking to Africa saw the .375 H&H increasing in popularity. A further boost in popularity came when African colonies enacting legislation stipulating that the 9.3 mm (0.37 in) or the .375 in (9.5 mm) be the minimum bullet diameter for dangerous game. The legislating away of sub minimum cartridges forced the users of these cartridges to pick up a cartridge which qualified for the shooting of these game species and the logical choice was to move up to the .375 H&H Magnum.[6]

Design & specifications

The .375 H&H Magnum case design was conceived to use cordite; a stick type propellant used widely in the United Kingdom. The tapering cartridge body design and the small shallow shoulder are typical aspects of cartridges optimized for the use of this propellant.[8] An advantage of such a case design is that it will feed and extract smoothly thus contributing to the cartridge's reliability in the field.

Unlike previous cartridges, the .375 H&H operates at relatively higher pressures and was designed from the outset for use with smokeless powders that can generate higher pressures and thus higher velocities. However, when the cartridge was designed pressure levels were held to 47,000 psi (3,200 bar) as cordite was sensitive to temperature and could cause dangerously high pressures in the hot tropical climates of Africa and India. However, modern smokeless powders are not as sensitive to ambient temperatures as cordite and therefore both the CIP and SAAMI provide far higher allowable pressures than the original loading of the cartridge allowed.

CIP recommends that commencement of rifling begin at 8.91 mm (0.351 in). Bore diameter is given as 9.30 mm (0.366 in) and groove diameter is 9.55 mm (0.376 in). CIP recommends a six grove barrel contour with each grove having an arc length of 2.92 mm (0.115 in) and a twist rate of one rotation in 305 mm (12.0 in). Maximum chamber pressure is given at 4,300 bar (62,000 psi). There are no discrepancies between SAAMI and CIP values. However, CIP measures angle α (shoulder angle) as 29°55'43". SAAMI measure the shoulder angle as α/2 which is given by SAAMI to be 15°.

Performance

When the .375 H&H Magnum was released in 1912 it was loaded with three bullet weights: a 235 gr (15.2 g) at 2,800 ft/s (850 m/s), 270 gr (17 g) at 2,650 ft/s (810 m/s)and a 300 gr (19 g) at 2,500 ft/s (760 m/s).[9] However, today, with the availability of a wide range of powders, velocities gains of 150–200 ft/s (46–61 m/s) can be realized. Acceptable bullet weights for the .375 H&H Magnum range from 200 gr (13 g) to 380 gr (25 g). The lighter bullets, those weighting 210 gr (14 g) to 235 gr (15.2 g) are suitable for lighter plains game. Bullets weighting between 250 gr (16 g) to 285 gr (18.5 g) can be used on heavy bodied plains game. Bullets weighting 285 gr (18.5 g) to 300 gr (19 g) should be reserved for heavy dangerous game.

Today, a typical factory load such as Remington’s R375M1 or Federal’s ammunition will launch a 270 gr (17 g) spitzer bullet at 2,690 feet per second (820 m/s) with 4,337 ft·lbf (5,880 J) of energy at the muzzle. This load has approximately the same trajectory as the 180-grain (12 g) bullet from a .30-06 Springfield. However while the .30-06 generates only about 2,914 ft·lbf (3,951 J) compared with the .375 H&H. The 270 gr (17 g) spitzer bullet at .375 H&H velocities has a maximum point black range (MPBR) of about 260 yd (240 m) when sighted in at about 220 yd (200 m).

The typical 300 gr (19 g) ammunition manufactured by Federal and Remington have a muzzle velocity of 2,530 feet per second (770 m/s) churning out 4,263 ft·lbf (5,780 J) of energy. The 300 gr (19 g) ammunition has a bullet trajectory similar to that of the .308 Winchester firing a 180 gr (12 g) bullet. The trajectory allows for a MPBR of about 245 yd (224 m) when zeroed in for 210 yd (190 m).

Scant attention is paid today to bullets in the 225–235 gr (14.6–15.2 g) weight range. At present no mainstream ammunition manufacturer produces ammunition loaded with these bullets. However these bullets are available for those wishing to handload. Bullets in this weight range can be launched at velocities of 2,800–2,900 ft/s (850–880 m/s).

Hornady new Superformance line of cartridges provides a leap in performance to the .375 H&H cartridge. The Superformance line uses a powders specifically blended for each cartridge. Hornady’s 375 H&H 270 gr SP-RP Superformance ammunition fires a 270 gr (17 g) bullet at 2,800 ft/s (850 m/s) for while the 375 H&H 300 gr DGS Superformance fires a 300 gr (19 g) bullet at 2,670 ft/s (810 m/s) generating 4,699 ft·lbf (6,371 J) and 4,748 ft·lbf (6,437 J) of energy respectively.

The 9.3x64mm Brenneke cartridge is probably the closest European continental ballistic twin of the .375 Holland & Holland Magnum. When compared to the .375 Holland & Holland Magnum the 9.3x64mm Brenneke uses a bullet of a slightly smaller diameter of .366 in (9.3 mm) versus the .375 H&H which uses a .375 in (9.5 mm) bullet a difference of only .009 in (0.23 mm).

Sporting usage

The .375 H&H Magnum is one of the most versatile cartridges and is referred to by Jack O’Connor as the "Queen of the Medium Bores".[10] The cartridge is very popular in Africa where it is considered one of the best all-round rifle cartridges. It is capable of taking any big species including all the Big Five game animals.[11] The big game hunter, John ”Pondoro” Taylor, held the .375 H&H Magnum in such high esteem that he dedicated a chapter in the book African Rifles and Cartridges.

The .375 H&H Magnum was designed from the ground up as a dangerous game hunting cartridge and to take advantage of the smokeless propellants available at the turn of the 20th Century. As a cartridge design which was optimized for that sole purpose, it has found little to no use outside this sphere of usage. This is partly due to bullet selection as spitzer and round nose bullets are the norm, although Hornady does manufacture a 300 gr (19 g) BTSP bullet with a high ballistic coefficient of .460 (G1).

Ammunition loaded with the 300 gr (19 g) or heavier bullet the .375 H&H is adequate for heavy thick skinned dangerous game such as elephant and rhinoceros in most conditions. Today, due to pace at which hunting is conducted and the requirement of success within certain time constraints, the .375 H&H Magnum is considered under powered for elephant, rhinoceros and buffalo as the only shooting situation that might present itself might be an adverse one. However, there is little doubt that it has been successfully been used to take these heavy dangerous game species. There is some speculation that the .375 H&H Magnum has been used to take more Big Five game than any other cartridge. Even today, many professional hunters, outfitters and wildlife management personnel in Africa continue to rely on the .375 H&H Magnum to carry out their duties throughout the continent.

Bullets weighing 325–350 gr (21.1–23 g) will have sectional densities between .330 and .356. These bullets can be launched at velocities between 2,380–2,470 ft/s (730–750 m/s) giving these bullets greater penetration than a 500 gr (32 g) .458 bullet at 2,240 ft/s (680 m/s).

Bullets weighting in the range of 250–270 gr (16–17 g) perfect for the largest cats such as the lion or tiger. While these felids do not require extremely powerful cartridges, (a .300 Winchester Magnum can considered a minimum for these cats), local requirements or regulations may require a larger cartridge than the .375 H&H Magnum. This range of bullets also is a great choice for most plains game species in Africa, elk, red deer and moose (called elk in Europe) in North America and Europe.

There are a great number of rifles (and even a few handguns) chambered for the .375 H&H. Many types of actions are used, including single-shots, double-rifles, and bolt actions. When hunting dangerous game, a double-rifle or a controlled-feed bolt action rifle is most commonly recommended, as a quick follow-up shot may be necessary, and reliability of the firearm becomes of paramount importance.

The one sport in which the .375 H&H Magnum has made some gains in has been the Big Bore Shoots such as those sponsored by the Big Bore Association of South Africa and its affiliated chapters. The .375 H&H Magnum is considered a transitional bore by the association and the minimum cartridge which is allowable for score keeping.[12]

Variants

The .375 H&H Magnum long tapering body and shallow shoulders are generally believed not to promote long case life due to case head separation above the belt. The case design does not promote the optimal use of the cartridge size to gain performance. Modern cartridges have very little taper so as to benefit from a larger powder capacity. It comes as no surprise that there have been a few attempts to improve the performance of the cartridge.

.375 Flanged Magnum

The .375 Flanged Magnum also known as the .375 H&H Flanged Magnum and the .375 Flanged Nitro Express is the companion cartridge to the .375 H&H Magnum for use in double and single shot rifles and was released together with the .375 H&H Magnum by Holland & Holland. It is considered the flanged (rimmed) version of the .375 H&H Magnum. The flanged cartridge is loaded to a lower pressure of 3,250 bar (47,100 psi) in comparison to the .375H&H Magnum.

The CIP has published mandatory specifications for the .375 Flanged Magnum. Bore ∅ for the cartridge is 9.30 mm (0.366 in) and the groove ∅ is 9.55 mm (0.376 in). The barrel will have 6 grooves with a twist of one revolution in 305 mm (12.0 in) and each groove being 2.92 mm (0.115 in)wide. SAAMI has not published specifications nor recommendations in regard to this cartridge.

The cartridge is capable of firing a 235 gr (15.2 g) bullet at 2,800 ft/s (850 m/s), a 270 gr (17 g) bullet at 2,650 ft/s (810 m/s) and a 300 gr (19 g) bullet at 2,500 ft/s (760 m/s) with muzzle energies of 4,090 ft·lbf (5,550 J),4,200 ft·lbf (5,700 J) and 4,160 ft·lbf (5,640 J) respectively. The cartridge is appropriate for all game species as the .375 H&H Magnum cartridge.

.375 H&H Ackley Improved

The .375 H&H Ackley Improved was a cartridge designed by P.O. Ackley in an effort improve on the performance and case life of the .375 H&H Magnum. The improved case follows the formulaic Ackley design of a body of little taper and steep shoulder of 40°. The cartridge was found to be capable of 2,830 ft/s (860 m/s) with a 270 gr (17 g) bullet. A .375 H&H Magnum cartridge can be chambered and fired safely in a Ackley Improved chamber but with a loss of performance. .375 H&H Magnum case thus fired will form to the Ackley Improved chamber.

.375 Weatherby Magnum

The .375 Weatherby Magnum is in reality an improved case like the .375 H&H Ackley Improved. The case was designed by Roy Weatherby in 1944 and features the Weatherby double radius shoulder typical of all Weatherby cartridges. The .375 Weatherby Magnum is capable of launching a 300 gr (19 g) at 2,800 ft/s (850 m/s). The .375 H&H Magnum can be fired in the chamber of a .375 Weatherby Magnum with a slight loss in performance. Unlike the .375 H&H AI cartridge, the .375 Weatherby Magnum is loaded to higher pressures than the parent cartridge.

As a parent cartridge

The distinctive belted case of this cartridge was patented in Britain on 31 March 1891 by G. Roth of Austria. The first commercial use of the patent was in 1907 for the .375 Holland-Schoenauer cartridge for a Mannlicher-Schoenauer bolt-action rifle marketed by Holland & Holland. The .375 H&H used an improved belted case shared with the .275 H&H Magnum when they were introduced together in August, 1912.[13] This second belted case design was later used with the .300 H&H Magnum, and has been modified as the basis for "Magnum" cartridges developed by other arms manufacturers.

Cartridges based on the full length .375 H&H Magnum case

.300 H&H Magnum – based directly on the .375 H&H case. Adopted in the US as the .30 Super.
.30 Super – Essentially a slightly modified .300 H&H case made by Winchester
.300 Weatherby Magnum – via the full length .30 Super improved
7mm Shooting Times Westerner – Via the 8mm Remington Magnum
8 mm Remington Magnum – necked down improved .375 H&H case
.340 Weatherby Magnum – via the full length .30 Super improved
.358 Shooting Times Alaskan – Via the 8mm Remington Magnum
.375 Weatherby Magnum – via the .30 Super improved
.416 Remington Magnum – via the 8mm Remington Magnum
.458 Lott – based directly on the .375 H&H case
.470 Capstick – based directly on the .375 H&H case

Standard length cartridges based on the .375 H&H Magnum case

.257 Weatherby Magnum – via the .30 Super
.264 Winchester Magnum – based directly on the .375 H&H case
.270 Weatherby Magnum – via the .30 Super
7mm Remington Magnum – via the .264 Winchester Magnum case
7 mm Weatherby Magnum – via the .30 Super
.300 Winchester Magnum – based directly on the .375 H&H case
.308 Norma Magnum – used standard length Weatherby cases
.338 Winchester Magnum – based directly on the .375 H&H case
.358 Norma Magnum – used standard length Weatherby cases
.458 Winchester Magnum – based directly on the .375 H&H case

Short action cartridges based on the .375 H&H Magnum case

6.5mm Remington Magnum – via the .350 Remington Magnum
.350 Remington Magnum – via the 7mm Remington Magnum

See also

Footnotes

  1. ^ a b Skinner, Jay. "History of the .375 H&H Magnum". Jay Skinner. http://webpages.charter.net/375magnum/history.htm. Retrieved 18 May 2011. 
  2. ^ a b Rees, Clair (July 2000). ".375 H&H Magnum A Hunting Classic". Guns Magazine (FMG Publication). http://findarticles.com/p/articles/mi_m0BQY/is_7_46/ai_62893436/?tag=content;col1. Retrieved 27 October 2010. 
  3. ^ Taylor, John "Pondoro" (1994). African Rifles and Cartridges. Long Beach, CA: Safari Press. pp. 204. ISBN 1571572228. http://www.safaripress.com/product.php?productid=386&cat=328&page=1. 
  4. ^ http://www.gunsandammo.com/content/375-hh-magnum
  5. ^ http://www.norma.cc/content.asp?Typ=59&Lang=2&DocumentID=305&Submeny=4&Rubrik=Calibers&Title=375%20Holland%20&%20Holland%20Magnum
  6. ^ a b c d e f g h Gunyana. "Classic African Cartridges Part X – The .375 H&H Magnum". African Hunter Magazine. African Hunter. http://www.huntnetwork.net/modules/wfsection/html/Ahclassic%20African%20Cartridge%20Pt10.pdf. Retrieved 19 May 2011. 
  7. ^ van Wyk, Johan (October/November 2007). "Mr Rigby and the Mauser". African Outfitter 2/6. http://www.huntinglegends.com/rigby-and-mauser/. Retrieved 19 May 2011. 
  8. ^ "The Cartridge Case". exteriorballistics.com. Sierra Bullets. http://www.exteriorballistics.com/reloadbasics/cartcase.cfm. Retrieved 25 October 2010. 
  9. ^ Kynoch. ".375 Belted Magnum". Kynamco Ltd.. http://new-kynoch.apt-sites.com/375%20H&H%20belted.htm. Retrieved 19 May 2011. 
  10. ^ Jack O'Connor (1966). Complete Book of Rifles and Shotguns. Harper & Row. ISBN 0-06-071351-8. 
  11. ^ Taylor, John "Pondoro" (1994). "The Medium Bores" (Hardcover). African Rifles and Cartridges. Long Beach, CA: Safari Press. p. 131. ISBN 1-57157-222-8. OCLC 32685101. http://www.safaripress.com/product.php?productid=386&cat=328&page=1. 
  12. ^ "Our Shoots". Big Bore Association of South Africa. http://www.bigbore.org/index.php?option=com_content&view=article&id=48&Itemid=8. Retrieved 18 May 2011. 
  13. ^ Barr, Al, Teesdale, Jerald, Keith, Elmer & Hardaway, Ben F. Reloading Information (Volume 2) 1951 National Rifle Association pp.59&61

External links